Tucson Well Drilling | Water Well Drilling & Pumps
Talk to a local well contractorCall Now

WATER WELL DRILLING · TUCSON, AZ

Water Well Drilling in Tucson, AZ

Need water well drilling in Tucson? Tell us what you need and we will connect you with an independent local contractor who works your area.

Call (820) 219-8428
Local well contractors
Wells sized to your parcel
All of Pima County

Tucson Well Drilling operates this website and connects local customers with local contractors. We don't do the work ourselves and we don't check any contractor's qualifications, so confirming that is up to you before you hire.

Get a Free Quote

Send a few details and a local well drilling contractor can get back to you with timing and a price.

One request, no obligation. See the disclaimer for full terms.

Request sent

A local contractor will reach out shortly. Watch for a call from an unknown number.

Well Services Across the Tucson Area

From a new water well to pump repair and rehabilitation, here's the work local contractors handle for property owners around Tucson.

Well Drilling

New water well drilling for homes, ranches, and rural parcels across the Tucson Basin.

Learn more →

Well Pump Installation & Repair

Submersible and jet pump installation, replacement, and repair to restore water pressure and flow.

Learn more →

Well Deepening & Rehabilitation

Deepening older wells and rehabilitating low-yield wells as the water table drops.

Learn more →

Water Testing

Water sampling and testing so property owners know what's coming out of the ground.

Learn more →

Commercial & Agricultural Wells

High-capacity wells for farms, ranches, and commercial operations across Pima County.

Learn more →

Irrigation Wells

Irrigation and stock wells for growers, orchards, and rural acreage.

Learn more →

The Geology Under Your Feet in the Tucson Basin

The Tucson Basin isn't solid rock a few feet down. It's a deep, alluvium-filled valley, a graben, where the ground between the surrounding fault-block mountains dropped over millions of years and then filled with sediment washed off those mountains. That fill runs hundreds to thousands of feet deep in places, and it's the reason wells here are possible at all: the groundwater sits in the pore spaces between all that sand, gravel, and clay. A driller isn't punching through granite for most of the depth; they're working through layers of basin fill that vary from loose sand to tightly packed clay to cemented gravel.

That variation is exactly why no two parcels drill the same. Near the Santa Cruz River corridor through the center of the valley, the water table has historically sat shallower, because the river channel and its underflow recharge the aquifer there. Move out toward the flanks of the basin, up onto the alluvial fans and bajadas that slope down from the Santa Catalinas, the Rincons, the Santa Ritas, and the Tucson Mountains, and the depth to water generally increases. The fill on those fans also tends to be coarser, full of the gravel and cobble that mountain washes drop as they lose energy spreading onto the valley floor.

Then there's caliche. Across the Tucson Basin, and much of southern Arizona, layers of caliche, calcium carbonate that has cemented the soil into a hardpan, show up in the drilling profile. Caliche can slow a drill bit considerably and add rig time for each layer encountered. A homeowner watching the rig might not see much happening at the surface, but the driller feels every caliche layer in the rate of penetration. It's one of the honest reasons a well quote in this region can't be a flat number pulled from a chart: the ground decides a lot of the job.

What Gets Done

New wells, pump work, and everything after

Most calls fall into a few buckets: a new water well on raw or newly built land, a replacement when an old well runs dry or the casing fails, and pump or pressure work when the well is fine but the water stopped.

If you're not sure whether you need a whole new well or just a pump, that's a normal place to start. A local contractor can usually tell the difference fast.

Water well drilling

The Tucson Active Management Area and What It Means for Your Well

Arizona put groundwater under active management in 1980 with the Groundwater Management Act, which set up Active Management Areas around the state's major population centers. Tucson is one of them. The Tucson AMA carries a state goal of safe yield, the point where the water pulled out of the aquifer each year is balanced by the water recharging it. That goal shapes the rules that apply to every well drilled inside the AMA boundary.

In practical terms, before a well is drilled, deepened, or modified anywhere in the Tucson AMA, a Notice of Intent to Drill has to be filed with the Arizona Department of Water Resources, and the work has to be performed by a licensed driller. Wells fall into two broad categories. Exempt wells are typically domestic wells pumping 35 gallons per minute or less, serving a household and its normal residential uses. Non-exempt wells, which pump above that threshold, face tighter permitting because they draw more heavily on the shared aquifer. Which category your project falls into changes the paperwork and, sometimes, whether a well is even the right path for the parcel.

None of this is something we handle for you, and it's worth being clear about that. We operate this website and connect local property owners with independent well drilling contractors. Those contractors know the AMA process because they file it constantly. Confirming that a given contractor holds current ADWR and Arizona Registrar of Contractors licensing, and that they carry whatever insurance you expect, is your responsibility as the property owner before you sign anything. Arizona makes that easy to check: both ADWR and the Registrar of Contractors can tell you whether a driller is licensed and in good standing.

Areas We Cover

We operate this website and connect property owners with local well drilling contractors across Pima County and nearby communities. Don't see your area? Call (820) 219-8428, contractors cover the whole region.

Oro Valley

Oro Valley sits at the foot of Pusch Ridge and the Santa Catalina Mountains, north of Tucson along the Cañada del Oro wash. The town incorporated in 1974 and grew fast around master-planned communities like Rancho Vistos...

Oro Valley well drilling →

Marana

Looking for well drilling contractors in Marana? Marana runs northwest of Tucson along the Santa Cruz River and Interstate 10, historically a cotton and farming town before the subdivisions arrived. That agricultural past means a lot of older irrigation wells across th...

Marana well drilling →

Sahuarita

Sahuarita lies south of Tucson between the Santa Rita Mountains and the Santa Cruz River, next to the pecan orchards that Farmers Investment Co. planted decades ago, some of the largest irrigated pecan groves in the coun...

Sahuarita well drilling →

Vail

Vail sits southeast of Tucson near the Rincon Mountains and Colossal Cave, a rural-turning-suburban area where large-lot parcels and horse properties are common. The old rail siding gave the community its name. Ground he...

Vail well drilling →

Catalina Foothills

Catalina Foothills spreads across the bajada below the Santa Catalinas, one of the older and more established areas north of central Tucson, known for hillside homes and desert lots. Building and drilling on the foothill...

Catalina Foothills well drilling →

Green Valley

Green Valley lies south of Sahuarita along the Santa Cruz, a large retirement community founded in the 1960s and ringed by pecan orchards and the old Pima Mine country. The Santa Rita Mountains rise to the east. It's an ...

Green Valley well drilling →

Catalina

Catalina sits north of Oro Valley at the foot of the Catalinas near the Pinal County line, a rural community of large lots and horse properties along the Cañada del Oro. Many parcels out here are well-served rather than ...

Catalina well drilling →

Three Points

Three Points, also called Robles Junction, sits southwest of Tucson where State Route 86 heads toward Kitt Peak and the Tohono O'odham Nation. It's open desert ranch country on the western edge of the valley, where wells...

Three Points well drilling →

Avra Valley

Avra Valley opens up west of the Tucson Mountains, a broad agricultural and rural basin that's its own recognized sub-basin in the regional groundwater model. Farms, ranches, and large rural parcels dot the valley, and T...

Avra Valley well drilling →

Casas Adobes

Looking for water well drilling in Casas Adobes? Casas Adobes is one of the older suburban communities northwest of Tucson, straddling Oracle and Ina Roads below the Catalinas. It grew up around one of Tucson's first shopping centers in the late 1940s. Established neig...

Casas Adobes well drilling →

Corona de Tucson

Corona de Tucson sits southeast of the city near the Santa Rita foothills, a rural-residential community that grew from a small townsite into large-lot subdivisions. It's high-desert grassland country between Tucson and ...

Corona de Tucson well drilling →

Benson

Benson sits east of Tucson in Cochise County along the San Pedro River, an old railroad town on the way to Tombstone. Unlike the Tucson Basin, the San Pedro Valley is a separate groundwater basin outside the Tucson AMA...

Benson well drilling →

How Wells Work Here

Why depth and yield vary so much

A water well is a cased hole drilled to a water-bearing layer, with a pump that lifts water and a pressure tank that keeps it steady at the tap. Simple in outline, but the depth you reach and the water you get depend entirely on the specific parcel.

Near the Santa Cruz corridor the water table historically runs shallower; up on the bajadas below the Catalinas and Rincons it runs deeper. A contractor prices from that reality, which is why a real quote comes after they've read your site.

Well drilling rig

How a Water Well Actually Gets Built

A finished well is more than a hole with a pump in it. Getting reliable, sand-free water out of the ground for decades takes a sequence of steps, and understanding them helps you follow what a contractor is doing and why the pricing lands where it does.

Siting and permitting. A licensed driller looks at the parcel, the likely depth to water, nearby well logs where they exist, and the intended use, then files the Notice of Intent with ADWR. The drilling card ADWR issues has to be in the driller's possession before work begins.

Drilling. Most wells in this region are drilled with rotary or air-rotary rigs that cut through the basin fill while circulating fluid or air to carry the cuttings up and out. The rate of progress swings with the ground, fast through loose sand, slow through caliche and cobble. The driller keeps a log of what the bit passes through, which becomes part of the official Well Driller Report filed with the state.

Casing and screen. Once the borehole reaches the water-bearing zone, steel or PVC casing is set to keep the hole open and seal out surface contamination. Across the water-producing intervals, the casing is either perforated or fitted with well screen. Screen choice matters more than most homeowners realize: continuous wire-wrap screen offers far more open area than older slotted pipe and lets the well be developed and maintained properly, which is why it's the preferred design. A proper surface seal near the top, required under Arizona's well construction rules, keeps runoff and shallow contamination from sliding down the outside of the casing into your water.

Gravel pack and development. In many wells, a graded gravel pack is placed in the annular space between the screen and the borehole wall. Sized correctly against the aquifer's sand, it holds back fines while letting water flow freely. After it's placed, the well is developed, surged and pumped to pull the fine material out of the pack and the surrounding formation, so the finished well produces clean, sand-free water. Skipping or shortcutting development is how you end up with a well that pumps sand and wears out pumps.

Pump and test. Finally a pump is set and the well is tested, pumped at a steady rate while the water level is watched, to measure what it actually yields and how fast it recovers. That test number, gallons per minute, is what tells you whether the well can support a household, a herd, or an irrigated field.

Equipment On Site

The rig does the heavy part

Drilling a water well takes a purpose-built rig, casing, and a crew to run them. It isn't a job that improvises well, which is the real argument for a contractor who does it constantly around Tucson.

Once the hole is drilled and cased, the pump and pressure tank turn it into running water at the house. The contractors we connect you with carry it end to end.

Well drilling equipment

What Drives the Cost of a Well Around Tucson

Well pricing genuinely isn't one number, and any honest answer walks through the variables rather than quoting a figure sight unseen. As general regional context, several things move the total on a Tucson-area well.

Depth to water and total depth. The deeper the water, the more footage a driller has to cut and case, and the more casing, screen, and pump capacity the job needs. Because the Tucson-area water table has been drawn down over decades of pumping toward that safe-yield goal, a lot that hit water at one depth years ago can drill deeper today. A neighbor's old well log is a rough hint, not a promise.

Ground conditions. Caliche layers and coarse gravel off the mountain fronts slow drilling and add rig time compared with finer valley-floor material. Two parcels the same depth apart can price differently purely on what's between the surface and the water.

Well design and materials. Casing diameter and material, screen type, gravel pack, and the size of the pump and pressure system all factor in. A larger home or an irrigation well needs more than a modest domestic well.

Permitting and location. Inside the Tucson AMA, the Notice of Intent process applies, and non-exempt wells carry more permitting than exempt domestic wells. Access to the parcel for a drill rig matters too.

Every one of these lands in the quote the independent contractor gives you after reading your site. We don't set or guarantee any price, and we'd be suspicious of anyone who quotes a flat well cost over the phone before seeing the ground. Call (820) 219-8428 and we'll connect you with a local contractor who can put real numbers to your parcel.

Signs Something's Wrong

When to call about your well

Water pressure dropping off, air spitting from the taps, sputtering that comes and goes, cloudy or sandy water, or a pump that runs constantly are the common signals. Sometimes it's the pump, sometimes the well itself.

Catching it early usually means a smaller repair. A contractor who works Tucson wells can tell you fast which one you're dealing with.

Water well and pump system

When an Older Well Needs Deepening or Rehabilitation

Wells don't last forever without attention, and in an area where the regional water table has been dropping, an older well can slowly fall behind. The symptoms show up gradually: the well that always kept up starts to struggle during peak demand, the pump runs longer, pressure sags, or the water turns cloudy or starts carrying sand. Sometimes the fix is the pump or pressure system. Sometimes it's the well itself.

Deepening extends an existing well down to reach water that has retreated below the original bottom, which can make sense when the well is otherwise sound and the geology cooperates. Rehabilitation tackles a different problem: over years, mineral scale, sediment, and bacterial fouling can clog the screen and the gravel pack, choking off the flow even when there's plenty of water in the aquifer. Cleaning and redeveloping the well can restore lost yield without drilling a new hole. Which path fits, deepen, rehab, or in some cases replace, depends on the well's construction, its current condition, and the depth to water on the parcel now. A contractor evaluates the specific well rather than assuming, and that evaluation is where the decision should start.

See Well Drilling Up Close

A short look at the kind of water well work that happens across the Tucson Basin.

Why a Local Contractor Reads the Parcel, Not an Average

Everything above points to the same conclusion: in the Tucson Basin, the specifics of your parcel drive the job. Depth to water, the presence and thickness of caliche, how coarse the fill is, whether you're near the Santa Cruz corridor or up on a bajada, what you need the water for, and which AMA permitting category applies, all of it changes from one property to the next. A contractor who works this area reads those specifics instead of applying a one-size number.

Our role is straightforward. We operate this website and connect local property owners with independent local well drilling contractors across the Tucson area and Pima County. We aren't a drilling company, we don't perform or supervise the work, and we don't vet, verify, or confirm any contractor's insurance, licensing, or credentials, that's yours to confirm before you hire. What we do is get you talking to someone who works your area. Call (820) 219-8428 and we'll point you to a local contractor who can look at your parcel and give you real answers.

Find Us in Tucson

Based on West Grant Road and connecting property owners with well contractors across the region.

Well Drilling FAQ

Do I need a permit to drill a well in the Tucson area?

Yes. The Tucson area sits inside the Tucson Active Management Area, so a Notice of Intent to Drill must be filed with ADWR before drilling, and the work must be done by a licensed driller. Confirming a contractor's ADWR and ROC licensing is your responsibility as the property owner.

How deep are wells around Tucson?

It varies widely by parcel. The Tucson Basin is a deep alluvial valley, and depth to water depends on where the parcel sits relative to the Santa Cruz River and the surrounding mountains. A local driller reads your specific site.

Who actually does the drilling?

Independent local well drilling contractors. We operate this website and connect property owners with them; we don't perform the work ourselves or vet their licensing or insurance, that's yours to confirm.

Can you help with pump problems, not just new wells?

Yes. The contractors handle well pump installation and repair, well deepening and rehabilitation, water testing, and irrigation and commercial wells, not only new drilling.

Need well drilling in the Tucson area?

We operate this website and connect local property owners with independent local well drilling contractors. Call and we'll get you talking to someone who works your area.

Call (820) 219-8428
Talk to a local well contractorCall Now